| New Model Prototype Information from Fox Corporation We continue under going to making New model prototype now, You can see it what we do !!. Since end of Dec 2006 it was started for research and develop for prototype in Fox Corporation . Story of FA-200 Aero Subaru This Model is proudly & truly Japanese design from Fuji Heavy Industry . They are made some famous fighter of WW-2 , unfortunately we couldn't make Air plane some while after war. but Fuji Heavy Industry didn't forget to build air craft . They tried again to design for GA(General Aviation) plane. This model FA-200 Aero Subaru is proudly made in Japan . Our Fox Corporation asked to Fuji Heavy Industrial for authorized to make FA-200 model RC plane .Fuji agree for make this aircraft to us !!, we made some contract document ,Yes !!! model is authorized production can be!!!!. |
Back to Skunk Works FA200 Balsa constraction Kit available now . FA200 ARF RTF Kit available now . Jan 13 .2007. |
 |
Photo Left is Full size FA-200 Aero Subaru . What a beautiful design !. 4 seat , Ridged landing gear ,Low wing configuration, Aiming Acrobatic capability. |
 |
Here we go for make FA200 !! we started for research to make this airplane was end of 2006. This structural design test model gave us some point for develop RC model. We used Laser cut device ,this is absolutely good for making precise product . Let's check fuselage constriction , some feature ex, slide open door, Motor mount ,Material and many more !!. This skeleton flame is true first test shot .it's not same as production model but it's give us a lot of information for build next step . |
 |
This is second prototype of FA-200. We changed fuselage design to more valuable . this canopy doesn't slide but it's Okay for RC model , because easy handling will more good I believe. It's removable for change Battery or some work . Main wing attached to fuselage for check and find out some weak point . Prototype engine cowl attached to fuselage . Looks OK!!! what do you think ?? |
 |
This RC plane feature moving flaps for soft landing . What a beautiful surface is ! , it's all balsa wood and some ply construction for light weight . This plane will use latest brushless motor and 3S Lipo . Those equipment is very popular now . but this plane can use 10 class glow engine too . |
 |
Removable canopy , It need attach more stiffener to inside of roof area. Hatch latch must move to top of fuselage. March 24,2006 wrote. |
 |
I love this angle of photos flame always, what characteristics appear in
test fright . Don't miss it !!. |
 |
Use latest Blushless motor and 9x7 prop , current drain is around 13A at 10700 rpm by 8x5 prop. |
 |
Looks nice ? this register is my own full size Nr , but it's not FA200. |
 |
FA-200 was successful first fright at early April morning . This was grate time for us , it's fly well and stable well too . Looks so real ,sounds like full size . |
 |
I love this angle very much , looks same as full size taking off at local air port . |
| Back to Skunk Works |